Welcome to the Dongguan SupStrong Industrial Co., Ltd website!

Sitemap Feedback Chinese
Integrated modern
plastic products factory

Miss Xu+86-13802384015

热搜产品： 关键词01、 关键词02、 关键词03、 关键词04、 关键词05、

News
Navigation

Your location: home -> News
www.supstrong.com
13

2022-09

What is the cause of side decals on injection molded products?

What is the cause of side decals on injection molded products?

Plastic molds often encounter the phenomenon of product side scratches or scratches during injection molding, especially for deep cavity products. Whether it is a smooth or textured surface, scratches mainly occur in the front mold, directly affecting the appearance of the product. This is absolu......
>
13

2022-08

How to make ABS water nozzle material into a black and glossy mirror surface?

How to make ABS water nozzle material into a black and glossy mirror surface?

Black has always been considered a noble color, but this mystery and nobility are mostly only highlighted on the ultimate path. On the contrary, it is also the most vulgar and unbearable color. Take injection molding factories for example, they all like to make black products because there are to......
>
13

2022-08

Basic points of plastic mold design

Basic points of plastic mold design

Reasonable mold design is a prerequisite for the success or failure of molds, and the design of plastic molds is particularly important. There are n ways to mold the same structure,. The molding method determines the structure and processing cost of the mold, the product parting line, and the ser......
>
13

2022-08

What are the production steps for plastic shells?

What are the production steps for plastic shells?

The biggest driving force for intelligent manufacturing, Industry 2025, and the upgrading of the manufacturing industry lies in the discerning eye derived from bottom-up consumers' understanding of products. Consumers are the market, and any product that fails to please them will fail. Everyone i......
>
13

2022-08

What is the effect of adjusting back pressure in injection molding on the product?

What is the effect of adjusting back pressure in injection molding on the product?

Although we have always reminded and demanded ourselves to make plastic molds that can be easily debugged to produce high-quality products, it does not mean that we can ignore the technical content of injection molding processes and the huge data systems of injection molding machines. Third rate ......
>
13

2022-08

Is it more upscale to have a glossy or frosted appearance for the product?

Is it more upscale to have a glossy or frosted appearance for the product?

Whether to make the appearance of a product look good on a glossy surface or a frosted surface, many friends are confused when developing products, and some of them are based on their subjective aesthetics. Both high gloss and matte finishes are in demand in the market, mostly following market tr......
>
Totality 6 Total pages 1 Currently: page First page Previous Next Last page go to
Dongguan SupStrong Industrial Co., Ltd Copyright [ Website Management ]
[ GMAP ]